| Product name：KN-816C2 |
| Classification：E8016-C2 |
  |
- It is suitable for welding 540N/mm2 grade steel for low temperature resistance.
- It provides superior weldability, stable arc and good slag removal.
- Weld metal contains 3%Ni-0.25%Mo and good impact properties at -60°C.
- It is ideal for welding in LNG storage tanks or 3.5%Ni steel for low temperature resistance.
|
Welding Position
|
|||||||||||||||
|
All Positions
|
|||||||||||||||
|
Welding Instruction
|
|||||||||||||||
|
(1) Clean up the contaminations on the steel.
(2) Dry the electrodes at 350~400°C for 60 minutes before welding.
(3) Keep arc as short as possible. Take the back step method to prevent porosity at arc start and re-start. (Please refer to Appendix A)
(4) High heat input will lower the impact value. Please carefully select the welding current.
(5) The preheat temperature for thick plate is 50~100°C.
|
|||||||||||||||
|
TypicalChemical Composition of Weld Metal (wt %)
|
|||||||||||||||
|
C
|
Si
|
Mn
|
P
|
S
|
Ni
|
|
|||||||||
|
0.065
|
0.32
|
0.88
|
0.010
|
0.008
|
3.30
|
|
|||||||||
|
TypicalMechanical Properties of Weld Metal (PWHT: :620°Cx1Hr)
|
|||||||||||||||
|
Tensile Strength
N/mm2(kgf/mm2)
|
Yield Strength
N/mm2(kgf/mm2)
|
Elongation
%
|
Charpy V-Notch
|
||||||||||||
|
°C
|
J (kgf -m)
|
||||||||||||||
|
565(57.6)
|
465(47.5)
|
32
|
0
|
—
|
|||||||||||
|
-75
|
71
|
||||||||||||||
|
Size and SuggestedOperating Range (AC or DC+)
|
|||||||||||||||
|
Diameter (mm) x Length(mm)
|
2.6x300
|
3.2x350
|
4.0x400
|
5.0x400
|
|
||||||||||
|
Amp
|
H
|
70~100
|
100~140
|
140~180
|
180~230
|
|
|||||||||
|
V-up/OH
|
60~90
|
90~130
|
120~160
|
—
|
|
||||||||||
No.8, Luke 3rd Rd., Luzhu Dist., Kaohsiung City 821, Taiwan (R.O.C.) TEL:886-7-6955155 FAX:886-7-6955166
Copyright (C) Kuang Tai Metal Industrial Co., Ltd. All Rights Reserved. Designed by GRNET